YH-208 Brass Ball Valve（M/Double Hose Connector）

Core Selling Points

•Dual Outlet Efficiency: Splits gas flow to two appliances with one valve, reducing installation complexity.

•Stable Flow Balance: Prevents pressure fluctuations between connected devices.

•Space-Saving Compact Design: Fits in narrow cabinet or equipment spaces.

Application Scenarios

•Commercial kitchen dual-appliance gas supply, laboratory gas distribution, and small industrial multi-equipment gas lines.

【Core Advantages】
Gas‑special brass ball valve with male‑thread base and 90° double hose‑barb outlets fitted with two independent handles. Y‑branch design enables one inlet to supply two gas appliances with separate on‑off control for each outlet. Compact brass body and ISO228 thread allow simple fitting inside gas meter boxes, manifolds and pre‑fabricated gas lines.

【Product Features】
• Nominal Pressure: 0.015 MPa
• Working Medium: Natural gas, Artificial gas, Liquefied petroleum gas
• Working Temperature: -20℃ ≤ t ≤ 80℃
• Parallel Pipe Thread to ISO228

【Applications】
Household and light‑commercial gas piping, for gas meters, cookers, boilers and flexible gas hoses where dual outlets and independent control are required in compact space.

【FAQs & Solutions】
Q: How to tell which handle controls each outlet?
A: Each outlet has dedicated handle. Turn handle parallel to flow for open, perpendicular for closed.
Q: Can body be rotated after installation?
A: Sealing depends on ISO228 thread. Apply gas‑rated thread sealant, do not over‑torque body after piping alignment.

【Important Notes】
Use gas‑grade PTFE tape or thread sealant. Perform soap‑bubble leak test for all joints after installation. It is low‑pressure gas valve (0.015 MPa). Not for steam, compressed air or high‑pressure media. Operate handles by moderate hand force; do not use pliers on stiff handles. Working temperature cannot exceed 80℃.